外商投资建设工程设计企业管理规定(附英文)
建设部 对外贸易经济合作部
中华人民共和国建设部
中华人民共和国对外贸易经济合作部
令
第114号
《外商投资建设工程设计企业管理规定》已经2002年9月9日建设部第63次常务会议和2002年9月17日对外贸易经济合作部第10次部长办公会议审议通过，现予发布，自2002年12月1日起施行。
建设部部长 汪光焘
对外贸易经济合作部部长 石广生
二○○二年九月二十七日
外商投资建设工程设计企业管理规定
第一条 为进一步扩大对外开放,规范对外商投资建设工程设计企业的管理,根据《中华人民共和国建筑法》、《中华人民共和国中外合资经营企业法》、《中华人民共和国中外合作经营企业法》、《中华人民共和国外资企业法》、《建设工程质量管理条例》、《建设工程勘察设计管理条例》等法律、行政法规,制定本规定。
第二条 在中华人民共和国境内设立外商投资建设工程设计企业,申请建设工程设计企业资质,实施对外商投资建设工程设计企业监督管理,适用本规定。
本规定所称外商投资建设工程设计企业,是指根据中国法律、法规的规定,在中华人民共和国境内投资设立的外资建设工程设计企业、中外合资经营建设工程设计企业以及中外合作经营建设工程设计企业。
第三条 外国投资者在中华人民共和国境内设立外商投资建设工程设计企业,并从事建设工程设计活动,应当依法取得对外贸易经济行政主管部门颁发的外商投资企业批准证书,在国家工商行政管理总局或者其授权的地方工商行政管理局注册登记,并取得建设行政主管部门颁发的建设工程设计企业资质证书。
第四条 外商投资建设工程设计企业在中华人民共和国境内从事建设工程设计活动,应当遵守中国的法律、法规、规章。
外商投资建设工程设计企业在中华人民共和国境内的合法经营活动及合法权益受中国法律、法规、规章的保护。
第五条 国务院对外贸易经济合作行政主管部门负责外商投资建设工程设计企业设立的管理工作；国务院建设行政主管部门负责外商投资建设工程设计企业资质的管理工作。
省、自治区、直辖市人民政府对外贸易经济行政主管部门在授权范围内负责外商投资建设工程设计企业设立的管理工作；省、自治区、直辖市人民政府建设行政主管部门按照本规定负责本行政区域内的外商投资建设工程设计企业资质的管理工作。
第六条 外商投资建设工程设计企业设立与资质的申请和审批,实行分级、分类管理。
申请设立建筑工程设计甲级资质及其他建设工程设计甲、乙级资质外商投资建设工程设计企业的,其设立由国务院对外贸易经济行政主管部门审批,其资质由国务院建设行政主管部门审批；申请设立建筑工程设乙级资质、其他建设工程设计丙级及以下等级资质外商投资建设工程设计企业的,其设立由省、自治区、直辖市人民政府对外贸易经济行政主管部门审批,其资质由省、自治区、直辖市人民政府建设行政主管部门审批。
第七条 设立外商投资建设工程设计企业,申请建筑工程设计甲级资质及其他建设工程设计甲、乙级资质的程序：
(一)申请者向拟设立企业所在地的省、自治区、直辖市人民政府对外贸易经济行政主管部门提出设立申请。
(二)省、自治区、直辖市人民政府对外贸易经济行政主管部门在受理申请之日起30日内完成初审；初审同意后,报国务院对外贸易经济行政主管部门。
(三)国务院对外贸易经济行政主管部门在收到初审材料之日起10日内将申请材料送国务院建设行政主管部门征求意见。国务院建设行政主管部门在收到征求意见函之日起30日内提出意见。国务院对外贸易经济行政主管部门在收到国务院建设行政主管部门书面意见之日起30日内作出批准或者不批准的书面决定。予以批准的,发给外商投资企业批准证书；不予批准的,书面说明理由。
(四)取得外商投资企业批准证书的,应当在30日内到登记主管机关办理企业登记注册。
(五)取得企业法人营业执照后,申请建设工程设计企业资质的,按照建设工程设计企业资质管理规定办理。
第八条 设立外商投资建设工程设计企业,申请建筑工程乙级资质和其他建设工程设计丙级及以下等级资质的程序,由各省、自治区、直辖市人民政府建设行政主管部门和对外贸易经济行政主管部门,结合本地区实际情况,参照本规定第七条以及建设工程设计企业资质管理规定执行。
省、自治区、直辖市人民政府建设行政主管部门审批的外商投资建设工程设计企业资质,应当在批准之日起30日内报国务院建设行政主管部门备案。
第九条 外商投资建设工程设计企业申请晋升资质等级或者申请增加其他建设工程设计企业资质,应当依照有关规定到建设行政主管部门办理相关手续。
第十条 申请设立外商投资建设工程设计企业应当向对外贸易经济行政主管部门提交下列资料：
(一)投资方法定代表人签署的外商投资建设工程设计企业设立申请书；
(二)投资方编制或者认可的可行性研究报告；
(三)投资方法定代表人签署的外商投资建设工程设计企业合同和章程(其中,设立外资建设工程设计企业只需提供章程)；
(四)企业名称预先核准通知书；
(五)投资方所在国或者地区从事建设工程设计的企业注册登记证明、银行资信证明；
(六)投资方拟派出的董事长、董事会成员、经理、程技术负责人等任职文件及证明文件；
(七)经注册会计师或者会计师事务所审计的投资方最近三年的资产负债表和损益表。
第十一条 申请外商投资建设工程设计企业资质应当向建设行政主管部门提交下列资料：
(一)外商投资建设工程设计企业资质申报表；
(二)外商投资企业批准证书；
(三)企业法人营业执照；
(四)外方投资者所在国或者地区从事建设工程设计的企业注册登记证明、银行资信证明；
(五)外国服务提供者所在国或者地区的个人执业资格证明以及由所在国或者地区政府主管部门或者行业学会、协会、公证机构出具的个人、企业建设工程设计业绩、信誉证明；
(六)建设工程设计企业资质管理规定要求提供的其他资料。
第十二条 本规定中要求申请者提交的资料应当使用中文,证明文件原件是外文的,应当提供中文译本。
第十三条 外商投资建设工程设计企业的外方投资者及外国服务提供者应当是在其本国从事建设工程设计的企业或者注册建筑师、注册工程师。
第十四条 中外合资经营建设工程设计企业、中外合作经营建设工程设计企业中方合营者的出资总额不得低于注册资本的2596。
第十五条 外商投资建设工程设计企业申请建设工程设计企业资质,应当符合建设工程设计企业资质分级标准要求的条件。
外资建设工程设计企业申请建设工程设计企业资质,其取得中国注册建筑师、注册工程师资格的外国服务提供者人数应当各不少于资质分级标准规定的注册执业人员总数的1/4;具有相关专业设计经历的外国服务提供者人数应当不少于资质分级标准规定的技术骨干总人数的1/4。
中外合资经营、中外合作经营建设工程设计企业申请建设工程设计企业资质,其取得中国注册建筑师、注册工程师资格的外国服务提供者人数应当各不少于资质分级标准规定的注册执业人员总数的1/8;具有相关专业设计经历的外国服务提供者人数应当不少于资质分级标准规定的技术骨干总人数的1/8。
第十六条 外商投资建设工程设计企业中,外国服务提供者在中国注册的建筑师、工程师及技术骨干,每人每年在中华人民共和国境内累计居住时间应当不少于6个月。
第十七条 外商投资建设工程设计企业在中国境内从事建设工程设计活动,违反《中华人民共和国建筑法机《建设工程质量管理条例》、《建设工程勘察设计管理条例》、《建设工程勘察设计企业资质管理规定》等有关法律、法规、规章的,依照有关规定处罚。
第十八条 香港特别行政区、澳门特别行政区和台湾地区的投资者在其他省、自治区、直辖市内投资设立建设工程设计企业,从事建设工程设计活动,参照本规定执行。法律、法规、国务院另有规定的除外。
第十九条 受理设立外资建设工程设计企业申请的时间由国务院建设行政主管部门和国务院对外贸易经济行政主管部门决定。
第二十条 本规定由国务院建设行政主管部门和国务院对外贸易经济行政主管部门按照各自职责负责解释。
第二十一条 本规定自2002年12月1日起施行,《成立中外合营工程设计机构审批管理规定》(建设〔1992〕180号)同时废止。
Regulations on Administration of Foreign-Invested Construction and Engineering Design Enterprises
The Ministry of Construction of the People’s Republic of China
The Ministry of Foreign Trade and Economic Cooperation of the People’s Republic of China
Decree No. 114
Regulations on Administration of Foreign-Invested Construction and Engineering Design Enterprises approved respectively at the 63rd Executive Meeting of the Ministry of Construction on 9 September 2002 and at the 10th Ministerial Meeting of the Ministry of Foreign Trade and Economic Cooperation on 17 September 2002 are now issued and shall come into force on 1 December 2002.
Minister of the Ministry of Construction: Wang Guangtao
Minister of the Ministry of Foreign Trade and Economic Cooperation: Shi Guangsheng
27 September 2002
Regulations on Administration of Foreign-Invested Construction and Engineering Design Enterprises
Article 1 These Regulations hereof are formulated in order to further the opening up to the outside and standardise the administration of foreign-invested construction and engineering design enterprises in accordance with such laws and regulations as the Construction Law of the People’s Republic of China, the Law of the People’s Republic of China on Sino-Foreign Equity Joint Ventures, the Law of the People’s Republic of China on Sino-Foreign Cooperative Joint Ventures, the Law of the People’s Republic of China on Wholly Foreign-Owned Enterprises, the Regulations on Administration of Construction Engineering Quality and the Regulations on Administration of Reconnoitring and Designing of Construction Projects.
Article 2 These Regulations shall apply to the establishment of foreign-invested construction and engineering design enterprises within the territory of the People’s Republic of China, the application for construction and engineering design enterprise qualifications and the administration and supervision of the foreign-invested construction and engineering design enterprises.
The term ‘foreign-invested construction and engineering design enterprise’ mentioned in these Regulations refers to a wholly foreign-owned construction and engineering design enterprise, or a Sino-foreign equity construction and engineering design joint venture or a Sino-foreign cooperatively construction and engineering design enterprise established within the territory of the People’s Republic of China in accordance with Chinese laws and regulations.
Article 3 A foreign investor, which intends to establish a foreign-invested construction and engineering design enterprise within the territory of the People’s Republic of China and carry out construction and engineering design business shall, in accordance with laws, obtain the foreign-invested enterprise approval certificate from the relevant foreign trade and economic cooperation administration department and register with the State Administration of Industry and Commerce or its authorised administration of industry and commerce at local levels, and also obtain the qualification certificate of construction and engineering design enterprise from the relevant construction administration department.
Article 4 Foreign-invested construction and engineering design enterprises shall abide by the laws, regulations and rules of the People’s Republic of China when carrying out construction and engineering design activities within the territory of the People’s Republic of China.
The lawful operation of foreign-invested construction and engineering design enterprises and their legal rights and interests within the territory of the People’s Republic of China shall be protected by Chinese laws, regulations and rules.
Article 5 The foreign trade and economic cooperation administration department of the State Council shall be responsible for the administration of establishing foreign-invested construction and engineering design enterprises. The construction administration department of the State Council shall be responsible for the administration of the qualifications of foreign-invested construction and engineering design enterprises.
The foreign trade and economic cooperation administration departments of the people’s government of provinces, autonomous regions or directly administered municipalities shall be responsible for the administration of establishment of foreign-invested construction and engineering design enterprises within their authorized jurisdiction ; the construction administration departments of the people’s government of provinces, autonomous regions or directly administered municipalities shall, in accordance with these regulations, be responsible for the administration of the qualifications of the foreign-invested construction and engineering design enterprises within their administrative region.
Article 6 The application for and the examination and approval of the establishment of a foreign-invested construction and engineering design enterprise and the qualifications shall be managed by a grading and categorization system.
Where an applicant is to apply for Grade A qualifications for construction and engineering design or other Grade A or Grade B qualifications for construction and engineering design, the establishment of the foreign-invested construction and engineering design enterprise shall be examined and approved by the foreign trade and economic cooperation administration department of the State Council and its qualifications shall be examined and approved by the construction administration department of the State Council. Where an applicant is to apply for Grade B qualifications for construction and engineering design or other Grade C or lower qualifications for construction and engineering design, the establishment of the foreign-invested construction and engineering design enterprise shall be examined and approved by the foreign trade and economic cooperation administration department of the people’s government of the province, the autonomous region or the directly administered municipality and its qualifications shall be examined and approved by the construction administration department of the people’s government of the province, the autonomous region or the directly administered municipality.
Article 7 The procedures for the establishment of a foreign-invested construction and engineering design enterprise and the application for construction and engineering design qualifications or other Grade A or B engineering design qualifications shall be:
(1) The applicant shall submit an application to the foreign trade and economic cooperation administration department of the people’s government of the province, the autonomous region or the directly administered municipality where the proposed foreign-invested construction and engineering design enterprise is to be established.
(2) The foreign trade and economic cooperation administration department of the people’s government of the province, or the autonomous region or the directly administered municipality shall complete the preliminary examination within 30 days of receiving the application, and shall, if it grants the preliminary approval, submit the application to the foreign trade and economic cooperation administration department of the State Council for further approval.
(3) Within 10 days of receiving the application for further approval, the foreign trade and economic cooperation administration department of the State Council shall forward the application to the construction administrative department of the State Council for review and comments. The construction administration department of the State Council shall provide its opinion in writing within 30 days of receiving the request. Within 30 days of receiving the response, the foreign trade and economic cooperation administration department of the State Council shall decide whether or not to approve the application and express such a decision in written form. If the application is approved, a foreign-invested enterprise certificate shall be granted; if the application is not approved, reasons for the disapproval shall be given in written form.
(4) Within 30 days of receiving the approval certificate, the applicant shall carry out enterprise registration with the relevant registration department.
(5) After obtaining business license for the legal entity, if the foreign-invested construction and engineering design enterprise is to apply for the construction and engineering design enterprise qualifications, the application shall be carried out in accordance with the Regulations on Administration of Construction and Engineering Design Enterprise Qualifications.
Article 8 The procedures for the establishment of a construction and engineering design enterprise and the application for Grade B qualifications and Grade C or lower qualifications for engineering design shall be administered by the construction administration department and the foreign trade and economic cooperation administration department of the people’s government of the province, or the autonomous region or the directly administered municipality based on local conditions with reference to Article 7 of these Regulations and Regulations on Administration of Construction and Engineering Design Enterprise Qualifications.
Examination and approval of the qualifications of foreign-invested construction and engineering design enterprises by the construction administration departments of the People’s government of provinces, autonomous regions or directly administered municipalities shall be put on file with the construction administration department of the State Council within 30 days after the approval is given.
Article 9 The application by a foreign-invested construction and engineering design enterprise to upgrade its qualifications or to add additional engineering qualifications shall be made to the relevant construction administration department in accordance with relevant regulations.
Article 10 An applicant which intends to establish a foreign-invested construction and engineering design enterprise shall submit the following documents to the relevant foreign trade and economic cooperation administration department:
(1) Application forms to establish a foreign-invested construction and engineering design enterprise signed by the investor’s legal representative;
(2) The feasibility study report prepared or accepted by the investor;
(3) The contract for establishment of foreign-invested construction and engineering design enterprise and the articles of association signed by the investor’s legal representative (only the the articles of association are required for the establishment of a wholly foreign-owned construction and engineering design enterprise);
(4) The notification of pre-verification of the name of the enterprise;
(5) Documentary evidence of legal entity registration of the investor to carry out construction and engineering design in its home country or region and its bank credential letter;
(6) Appointment letters and documentary evidence of the investor’s designated chairman and members of the board of directors, managers and technical managers etc.; and
(7) Balance sheets and profit and loss accounts of the investor over the past three years audited by a certified accountant or an accounting firm.
Article 11 The applicant applying for foreign-invested construction and engineering design enterprise qualifications shall submit the following documents to the relevant construction administration department:
(1) Application forms for the qualifications for a foreign-invested construction and engineering design enterprise;
(2) The approval certificate for the establishment of the foreign-invested construction and engineering design enterprise;
(3) The business license for the legal entity;
(4) Documentary evidence of legal entity registration of the investor to carry out construction and engineering design in its home country or region and its bank credential letter;
(5) Professional qualification certificate issued by his home country or region and the individual or enterprise construction and engineering design track record and documentary evidence of its reputation issued by the relevant governmental department or professional institution, association or notary public; and
(6) Other documents as required by Regulations on Administration of Construction and Engineering Design Enterprise Qualifications.
Article 12 All materials required to be submitted by an applicant under these Regulations shall be in Chinese. If the original documentary evidence is in a foreign language, a Chinese translation shall be provided.
Article 13 The foreign investor or the foreign service provider of a foreign-invested construction and engineering design enterprise shall be an enterprise engaged in construction and engineering design or a certified architect or a certified engineer in his or her home country.
Article 14 The total capital contribution of the Chinese party to a Sin-foreign equity construction and engineering design joint venture or a Sino-foreign cooperatively construction and engineering design joint venture shall not be less than 25% of the registered capital.
Article 15 The criteria of grading of qualifications of foreign-invested construction and engineering design enterprises shall be in accordance with the requirements of grading of qualifications of construction and engineering design enterprise issued by the construction administration department of the State Council.
Where a wholly foreign-owned construction and engineering design enterprise applies for the construction and engineering design enterprise qualifications, its foreign service providers who have been qualified as certified architects or certified engineers in China shall not be less than 1/4 of the total certified professionals required under the qualification grading criteria, and the foreign service providers who have the relevant design experience shall not be less than 1/4 of the total key technical personnel required under the qualification grading criteria.
Where a Sin-foreign equity construction and engineering design joint venture or a Sino-foreign cooperatively managed construction and engineering design enterprise applies for the construction and engineering design enterprise qualifications, its foreign service providers who have been qualified as certified architects or certified engineers in China shall not be less than 1/8 of the total registered professionals required under the qualification grading criteria, and its foreign service providers who have the relevant design experience shall not be less than 1/8 of the total key technical staff required under the qualification grading criteria.
Article 16 Each of the architects and engineers certified in China and the key technical personnel of the foreign service provider in a foreign-invested construction and engineering design enterprise shall reside within the territory of the People’s Republic of China for no less than a cumulative period of 6 months each year.
Article 17 Where a foreign-invested construction and engineering design enterprise carrying out construction and engineering design activities within the territory of the People’s Republic of China violates the Construction Law of the People’s Republic of China, Regulations on Administration of Construction Engineering Quality, Regulations on Administration of Prospecting and Designing of Construction Projects and Regulations on Administration of Construction Engineering Prospecting Design Enterprise Qualifications and other relevant laws, regulations and rules, it shall be penalized in accordance with relevant provisions.
Article 18 Investors from Hong Kong Special Administrative Region, Macao Special Administrative Region or Taiwan shall establish construction and engineering design enterprises and carry out businesses in other provinces, autonomous regions or directly administered municipalities in accordance with these Regulations, unless it is otherwise provided by laws, regulations and the State Council.
Article 19 The timing for accepting and processing the application for establishment of foreign-invested construction and engineering design enterprises shall be determined by the construction administration department of the State Council and the foreign trade and economic cooperation administration department of the State Council.
Article 20 The construction administration department of the State Council and the foreign trade and economic cooperation administration department of the State Council shall be responsible for interpreting these Regulations in accordance with their functions.
Article 21 These Regulations shall go into force on 1 December 2002. Regulations on Administration of Establishment of Sino-Foreign Project Design Joint Venture (File No. 180, 1992) shall be repealed at the same time.
对部分刀具实行管制的暂行规定
国务院批准 公安部发布
对部分刀具实行管制的暂行规定
1982年8月30日，国务院批准、公安部发布
第一条 为了保障公民人身安全，防止不法分子利用刀具作为凶器进行犯罪活动，特制订本规定。
第二条 本规定所管制的刀具是：匕首、三棱刀（包括机械加工用的三棱刮刀）、带有自锁装置的弹簧刀（跳刀）以及其它相类似的单刃、双刃、三棱尖刀。
第三条 匕首，除中国人民解放军和人民警察作为武器、警械配备的以外，专业狩猎人员和地质、勘探等野外作业人员必须持有的，须由县以上主管单位出具证明，经县以上公安机关批准，发给《匕首佩带证》，方准持有佩带。
佩带匕首人员如果不再从事原来的职业，应将匕首交还配发单位，《匕首佩带证》交回原发证公安机关。
第四条 机械加工使用的三棱刮刀，只限工作人员在工作场所使用，不得随意带出工作场所。
第五条 制造上述管制范围内刀具的工厂、作坊，必须经县、市以上主管部门审查同意和所在地县、市公安局批准，发给《特种刀具生产许可证》，方准生产。刀具样品及其说明（名称、规格、型号、用途、产量）须送所在地县、市公安局备案。产品须铸刻商标和号码（顺序号或批号）。
第六条 经销上述管制范围内刀具的商店，必须经县、市以上主管部门审查同意和所在地县、市公安局批准。购销要建立登记制度，备公安机关检查。
第七条 购买上述管制范围内刀具的单位和个人，必须符合第三、四条关于持有和使用的规定。军队和警察，由县、团以上单位凭上一级主管部门批准的函件，向指定单位定购。专业狩猎人员和地质、勘探等野外作业人员，由所属单位向所在地县、市公安局（公安分局）申请《特种刀具购买证》，凭证购买。三棱刮刀，凭单位介绍信向批准经销的商店购买。
第八条 使用上述管制范围内刀具的单位，必须建立健全使用保管制度，加强刀具的管理和检查，确保安全。持有上述刀具的个人，对刀具应妥善保管，不得随意赠送、转借他人使用。发现丢失、被盗，要及时报告公安保卫部门。凡因保管不当，造成丢失、被盗，而酿成严重后果的，要追究有关人员和单位领导的责任。
第九条 严禁任何单位和个人非法制造、销售和贩卖匕首、三棱刀、弹簧刀等属于管制范围内的各种刀具。严禁非法携带上述刀具进入车站、码头、机场、公园、商场、影剧院、展览馆或其它公共场所和乘坐火车、汽车、轮船、飞机。
第十条 本规定下达后，凡制造、销售上述管制范围内各种刀具的单位和持有匕首的专业狩猎人员和地质、勘探等野外作业人员，须向公安机关补办登记许可手续。非因生产、工作需要持有上述刀具的，应一律自动送交当地公安机关。
第十一条 《特种刀具生产许可证》、《匕首佩带证》和《特种刀具购买证》，样式由公安部统一规定，各省、市、自治区公安厅、局统一印制。
第十二条 少数民族由于生活习惯需要佩带的刀具，由民族自治区地区制订办法管理。
少数民族使用的藏刀、腰刀、靴刀等，只准在民族自治地方（自治区、自治州、自治县）销售。
第十三条 违反本规定，非法制造、销售、携带和私自保存管制范围刀具的，公安机关应予取缔，没收其刀具，并按照《中华人民共和国治安管理处罚条例》有关条款予以治安处罚；有妨害公共安全行为，情节严重，触犯刑律的，依法追究刑事责任。
第十四条 各省、市、自治区人民政府可根据本规定，制定具体管理办法，报公安部备案。
